# rm-rf.es

Cómo instalar el simulador de NetApp Data ONTAP

Hoy vamos a crear un entorno de pruebas para cabinas de almacenamiento Netapp. Se trata de un simulador de Data ONTAP (Sistema operativo de Netapp) con el cual podremos disponer de una cabina 100% funcional sobre la que hacer pruebas y modificaciones sin necesidad de utilizar las cabinas de producción.

El simulador se puede descargar desde el sitio web oficial (con registro). Esta es la dirección.

Vamos a proceder a la instalación, es realmente sencilla. Descomprimimos el fichero descargado y ejecutamos el setup (como root) del simulador:

# gunzip 7.3.4-tarfile-v22.tgz
# tar -xvf 7.3.4-tarfile-v22.tar
# sudo ./setup.sh

La salida de la instalación es similar a lo siguiente, veréis que os hace una serie de preguntas. Tenemos la posibilidad de añadir los discos que estimemos necesarios, crear un cluster, etc.

Script version 22 (18/Sep/2007)
Where to install to? [/sim]:
Would you like to install as a cluster? [no]:
Would you like full HTML/PDF FilerView documentation to be installed [yes]:
Continue with installation? [no]: yes
Creating /sim
Unpacking sim.tgz to /sim
Configured the simulators mac address to be [00:50:56:10:a8:fe]
Please ensure the simulator is not running.
Your simulator has 3 disk(s). How many more would you like to add? [0]: 9

The following disk types are available in MB:
        Real (Usable)
  a -   43   ( 14)
  b -   62   ( 30)
  c -   78   ( 45)
  d -  129   ( 90)
  e -  535   (450)
  f - 1024   (900)

If you are unsure choose the default option a
What disk size would you like to use? [a]: e
Disk adapter to put disks on? [0]:
Use DHCP on first boot? [yes]:
Ask for floppy boot? [no]:
Checking the default route...
Which network interface should the simulator use? [default]:
How much memory would you like the simulator to use? [512]: 256
Create a new log for each session? [no]:
Overwrite the single log each time? [yes]:
Adding 9 additional disk(s).
Complete. Run /sim/runsim.sh to start the simulator.

Procedemos a arrancar el simulador:

sudo /sim/runsim.sh

En el primer arranque, se ejecutará el asistente al igual que en una cabina real, donde configuraremos la red, hostname y demás configuraciones iniciales:

NetApp Release 7.3.4: Thu May 27 15:43:26 PDT 2010
System ID: 0099929383 ()
System Serial Number: 987654-32-0 ()
System Storage Configuration: Multi-Path
System ACP Connectivity: NA
Model Name: Simulator
Processors: 1
slot 0: NetApp Virtual SCSI Host Adapter v0
               12 Disks:              5.0GB
	1 shelf with LRC
	slot 1: NetApp Virtual SCSI Host Adapter v1
	slot 2: NetApp Virtual SCSI Host Adapter v2
	slot 3: NetApp Virtual SCSI Host Adapter v3
	slot 4: NetApp Virtual SCSI Host Adapter v4
                12 Disks:              5.0GB
		1 shelf with LRC
	slot 5: NetApp Virtual SCSI Host Adapter v5
	slot 6: NetApp Virtual SCSI Host Adapter v6
	slot 7: NetApp Virtual SCSI Host Adapter v7
	slot 8: NetApp Virtual SCSI Host Adapter v8
                4 Tapes:            VT-100MB
                                    VT-100MB
                                    VT-100MB
                                    VT-100MB
Please enter the new hostname []: filer1
Do you want to enable IPv6? [n]:
Do you want to configure virtual network interfaces? [n]:
Please enter the IP address for Network Interface ns0 []: 192.168.0.199
Please enter the netmask for Network Interface ns0 [255.255.255.0]:
Please enter media type for ns0 {100tx-fd, auto} [auto]:
Please enter the IP address for Network Interface ns1 []:
Would you like to continue setup through the web interface? [n]:
Please enter the name or IP address of the IPv4 default gateway:
	The administration host is given root access to the filer's
	/etc files for system administration.  To allow /etc root access
	to all NFS clients enter RETURN below.
Please enter the name or IP address of the administration host:
Please enter timezone [GMT]:
Where is the filer located? []:
What language will be used for multi-protocol files (Type ? for list)?:
language not set
Do you want to run DNS resolver? [n]:
Do you want to run NIS client? [n]:
	The Shelf Alternate Control Path Management process provides the ability
	to recover from certain SAS shelf module failures and provides a level of
	availability that is higher than systems not using the Alternate Control
	Path Management process.
Do you want to configure the Shelf Alternate Control Path Management interface for SAS shelves [n]:
Setting the administrative (root) password for filer1 ...
.
Do you want to configure the filer's DNS resolver service? [y]:
What is the filer's DNS domain name? []: 

CIFS local server is running.
....
....
....

Tras la configuración, accederemos directamente al login de la cabina y podremos comenzar a trabajar con el simulador:

filer1> sysconfig -r
Aggregate aggr0 (online, raid0) (zoned checksums)
  Plex /aggr0/plex0 (online, normal, active)
    RAID group /aggr0/plex0/rg0 (normal)

      RAID Disk	Device	HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      ---------	------	------------- ---- ---- ---- ----- --------------    --------------
      data    	v4.16	v4    1   0   FC:B   -  FCAL  N/A  120/246784        127/261248
      data    	v4.17	v4    1   1   FC:B   -  FCAL  N/A  120/246784        127/261248
      data    	v4.18	v4    1   2   FC:B   -  FCAL  N/A  120/246784        127/261248 

Spare disks

RAID Disk	Device	HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
---------	------	------------- ---- ---- ---- ----- --------------    --------------
Spare disks for zoned checksum traditional volumes or aggregates only
spare   	v4.19	v4    1   3   FC:B   -  FCAL  N/A  520/1065984       527/1080448
spare   	v4.20	v4    1   4   FC:B   -  FCAL  N/A  520/1065984       527/1080448
spare   	v4.21	v4    1   5   FC:B   -  FCAL  N/A  520/1065984       527/1080448
spare   	v4.22	v4    1   6   FC:B   -  FCAL  N/A  520/1065984       527/1080448
spare   	v4.24	v4    1   8   FC:B   -  FCAL  N/A  520/1065984       527/1080448
spare   	v4.25	v4    1   9   FC:B   -  FCAL  N/A  520/1065984       527/1080448
spare   	v4.26	v4    1   10  FC:B   -  FCAL  N/A  520/1065984       527/1080448
spare   	v4.27	v4    1   11  FC:B   -  FCAL  N/A  520/1065984       527/1080448
spare   	v4.28	v4    1   12  FC:B   -  FCAL  N/A  520/1065984       527/1080448

En futuros artículos comenzaremos a modificar configuraciones en el simulador para ver todas sus posibilidades.

Salir de la versión móvil